Product Description
TONGUE and GROOVE x 50 CM x 100 PIECES 6MM
£50.00
Out of stock
Email to a friendDescription
HIGHEST QUALITY
PINE SLIVERS
SPECIFICALLY FOR TONGUE AND GROOVE FLOORING
These slivers are made wide at the base to fit onto the tongue in tongue and groove flooring in a flat fashion. Until now there has not a solution for filling with an ordinary sliver.
These once fitted, can then be sanded as normal with excellent results.
The 6MM Sliver is 2MM at the Base
Highest trade produced quality slivers
Using SOLID PINE
Fill gaps between floorboards with easy-to-fit ‘Old Pine Slivers’ to give your floor that professional finish! “Slivering” quickly and easily fills those unsightly gaps in between wooden boards with wedges of old reclaimed timber.
The Old Pine Sliver is made from genuine old reclaimed floorboards, reclaimed joists and other reclaimed timber items. Colours may vary from Light to Dark – this cannot be guaranteed.
Use the OLD PINE Sliver to give your floor that professional finish.
Slivering fills the gaps in between wooden boards with wedges made of old reclaimed wood.
- Seals better
- Stops draughts – no cold air through gaps
- Stops odours
- Tightens floors up, keeping it solid
- No visible edges
- Gives a lasting and satisfying finish to your floor
2) Place the sliver in a gap and hammer it in.
3) Cut the excess once the glue is dry.
4) Your floor is now ready for sanding and finishing.
We have been trading over 30 years and have fantastic feedback – don’t accept second rate imitations.
Related Products
Here we have very fine saw dust which is ideal for mixing with Eukula or any other chemical for making a paste which is ideal for filling gaps in flooring, any screw holes, saw cuts, where any nails have been punched in or anywhere else you want to fill. This dust will take a stain and seals where you cannot get a sliver in. 
